Accessories

  • Display type
  • Results per page
  • Sort by
KMC Wall Plate 2 x 2 Sensor
  • KMC Wall Plate 2 x 2 Sensor
  • Code : HMO6036W
  • KMC white wall plate for 2"x2" sensors (HMO-6036W)

    • Wall plate for mounting STE-6000 series temperature sensors and THE-1102 humidity transmitters with temperature sensors

    No tech sheet available.

  • Contact PartsPros for assistance and lead time.

  • Qty avail. : 42
  • Availability : In stock
KMC Backplate, Obsolete
  • USD $6.53 /EACH
  • EACH
  • Qty avail. : 16
  • Availability : In stock
KMC BACKPLATE, T-STAT, WHITE, Obsolete
  • USD $6.53 /EACH
  • EACH
  • Qty avail. : 5
  • Availability : In stock
KMC Cover with window (Almond)
  • USD $7.91 /EACH
  • Qty avail. : 0
  • Availability : Contact PartsPros for assistance and lead time.
KMC Differential Pressure Probe, 4"
  • KMC Differential Pressure Probe, 4"
  • Code : SSS1002
  • KMC differential pressure flow sensor (SSS-1002)

    • Designed to sense differential pressure in the inlet section of VAV terminal and fan terminal units
    • Can also be used to sense differential pressure at other locations in the main or branch duct systems
    • Has one sensing point at 3-5/32" length

    Click here for tech sheet.

  • USD $14.43 /EACH
  • EACH
  • Qty avail. : 8
  • Availability : In stock
KMC Wall Plate, 4.8 x 5.5", for KMD-1160 / 1180 / 1261 / 1281 NetSensors, Light Almond, Obsolete
  • USD $17.79 /EACH
  • EACH
  • Qty avail. : 7
  • Availability : In stock
KMC Diaphragm
  • KMC Diaphragm
  • Code : VTD9424
  • KMC 4" diaphragm (VDT-9424)

    No tech sheet available.

  • USD $21.05 /EACH
  • EACH
  • Qty avail. : 11
  • Availability : In stock
KMC Cover Override Output Board
  • KMC Cover Override Output Board
  • Code : HPO6802
  • KMC output override board cover (HPO-6802)

    • A raised cover with labels that is required to secure the boards in the metal-case controllers

    Click here for tech sheet.

  • USD $23.22 /EACH
  • EACH
  • Qty avail. : 19
  • Availability : In stock
KMC Hollow Wall Mounting Bracket
  • USD $23.57 /EACH
  • Qty avail. : 0
  • Availability : Contact PartsPros for assistance and lead time.
KMC Control Panel Enclosure
  • USD $26.97 /EACH
  • EACH
  • Qty avail. : 1
  • Availability : In stock
KMC Diaphram
  • KMC Diaphram
  • Code : VTD9426
  • KMC 6" actuator diaphragm (VTD-9426)

    No tech sheet available.

  • USD $36.85 /EACH
  • EACH
  • Qty avail. : 5
  • Availability : In stock
KMC 50' KMC Thermostat Cable
  • USD $48.03 /EACH
  • EACH
  • Qty avail. : 10
  • Availability : In stock
KMC 75' Thermostat Cable
  • USD $62.44 /EACH
  • EACH
  • Qty avail. : 23
  • Availability : In stock
KMC Actuator Tri-State Non failsafe, 24VAC, 40in-lbs
  • KMC Actuator Tri-State Non failsafe, 24VAC, 40in-lbs
  • Code : MEP4001
  • KMC ControlSet direct-coupled (non-fail safe) actuator (MEP-4001)

    • Part of the MEP-4000 series
    • Provides tri-state/two-position or proportional control for small dampers or valves in HVAC systems
    • Has a bracket with a patented quick-mounting mechanism

    Click here for tech sheet.

  • USD $91.03 /EACH
  • EACH
  • Qty avail. : 1
  • Availability : In stock
KMC FREESESTAT
  • KMC FREESESTAT
  • Code : CTE3006
  • KMC low limit controller, thermostat (CTE-3006)

    • Automatic reset
    • Used on HVAC equipment requiring low-temperature control

    No tech sheet available.

  • USD $122.46 /EACH
  • Qty avail. : 0
  • Availability : Contact PartsPros for assistance and lead time.
KMC IP Transducer
  • KMC IP Transducer
  • Code : XEC3001
  • KMC E/I-P transducer (XEC-3001)

    • Used in HVAC systems to provide an accurate signal for positioning damper and valve actuators based on branch line pressure
    • Converts analog voltage (E) or current signal (I) into a linear pneumatic (P) output signal
    • Can be mounted vertically or horizontally

    Click here for tech sheet.

  • USD $129.34 /EACH
  • Qty avail. : 0
  • Availability : Contact PartsPros for assistance and lead time.
KMC PNEU Transducer E / I-P w / Override
  • KMC PNEU Transducer E / I-P w / Override
  • Code : XEC3004
  • KMC E/I-P transducer (XEC-3004)

    • Used in HVAC systems to provide an accurate signal for positioning damper and valve actuators based on branch line pressure
    • Converts analog voltage (E) or current signal (I) into a linear pneumatic (P) output signal
    • Can be mounted vertically or horizontally
    • Has a manual override that may be initiated by moving a jumper and adjusting a potentiometer

    Click here for tech sheet.

  • USD $149.57 /EACH
  • EACH
  • Qty avail. : 1
  • Availability : In stock
KMC USB Communicator
  • KMC USB Communicator
  • Code : KMD5576
  • KMC USB to EIA-485 communicator (KMD-5576)

    • Connects a computer USB port to a BACnet or KMDigital network
    • Provides network access to a computer running BACstage or WinControl (but not TotalControl)
    • Have replaced the EIA-232 serial ports

    Click here for tech sheet.

  • USD $264.76 /EACH
  • Qty avail. : 0
  • Availability : Contact PartsPros for assistance and lead time.
KMC Network Repeater
  • KMC Network Repeater
  • Code : KMD5575
  • KMC network repeater-isolator (KMD-5575)

    • Extends and reconditions EIA-485 network communications as well as enabling "T" or branch networks
    • Required after every 31 consecutive controllers on KMDigital or BACnet subnetworks
    • Isolation between subnetwork segments helps prevent ground loops or current between segments
    • Also creates a 1,500 volt barrier that protects other connected segments from overvoltage

    Click here for tech sheet.

  • USD $326.43 /EACH
  • EACH
  • Qty avail. : 3
  • Availability : In stock